Garage Door Repair Springs Have Sprung

If the door swings up in one piece or rolls up in pieces, overhead garage doors are operated by spring tension. These springs can eventually break or lose tension, but they can be replaced or rewound. You may want to check out Plano garage doors company for more. Before attempting or calling for repair, it’s important to know what pieces are involved.


The heavy-duty metal tracks mounted to your walls move your garage door. Garage doors come in a variety of styles, each with its own set of springs, such as extension, tension, or a combination of both.

Up-and-over gate

The door moves on horizontal tracks placed high on the wall in this style. These tracks should slant down toward the garage’s back end. On either side, a power spring is connected to the door frame and hooked to the door. Even if your springs are still in good shape, it’s a good idea to look around the brackets for any loose hardware, such as the screws and plates that hold them together.

Roll-up doors are a form of door that can be opened from

In order to roll the door up and back into the garage, the installed metal track curves from vertical to horizontal. Unlike swinging doors, the spring tension is operated by a pulley and cable system in this case. You can change the tension by pulling on the cable and retying the knots to lengthen or shorten it.

However, if the door only has one spring in the middle, call a garage door repair professional rather than attempting to repair or replace it yourself to prevent injury from the component’s extremely high tension.

Repairing garage door springs in general

Also on doors with several springs, repairing them is a difficult task best left to experienced do-it-yourselfers. If you’re up for the challenge, make sure your replacement and old springs are the same size, and get comfortable with winding bars so you can ease into the new part. When you wind your springs, they store energy, which can lead to injury if you’re not careful.